KYOCERA FINECAM S3


Review based on a production Finecam S3
(Known as the Yashica Finecam S3 in Europe and SE Asia)

 

Vendo causa inutilizzo fotocamera digitale KYOCERA FINECAM S3, perfettamente funzionante e senza alcun graffio.

 

In dotazione :

2  batterie ricaricabili Lithium ion 3.6v 800mAh (un pò esaurite)

1  Custodia e laccetto

2  Schede CF da 16 e 32 Mb

1  Cavo Usb per computer e addattatore schede di memoria

1  Trasformatore e ricaricatore batterie

Finecam S3 Specifiche

Type:

Digital still camera with record, playback, and erase modes.

Imaging Device:

1/1.8" square-pixel interlace readout system CCD with 3,340,000 pixels gross, 3,240,000 effective.

Recording media:

SD Memory Card, Multi-Media Card (MMC) Recording Capacity (Guideline) and Image Dimensions in Pixels (when using 16MB SD Memory Card, all pictures taken in the same mode). Super Fine: About 10 (2048 x 1536) Fine: About 20 (2048 x 1536) Normal: About 64 (1024 x 768) TIFF-RGB (non-compressed): About 1 (2048 x 1536) Movies (15 seconds each): About 2 (320 x 240) Image Format: Complies with JPEG standard (Exif ver. 2.1) DCF Standard (Design Rule for camera File systems),supports DPOF.

Lens:

2x optical zoom lens, f=7.8 mm - 15.6 mm (35mm equivalent 38-76mm), F2.8-3.5

Focusing Range:

About 90 cm - infinity.

In Macro Mode:

About 10 cm - 90 cm (at wide-angle setting).

Exposure Control/ Metering Method:

CCD multi-area evaluation,center-weighted, and spot metering.

Control Method:

Programmed AE, Aperture-Priority AE, Long Exposure modes.

Exposure Compensation:

+2.0 EV to -2.0 EV (in 1/3 steps).

Aperture Control:

Automatic, or manually settable to F2.8 or F6.2.

Automatic Exposure Linkage Range:

EV6 to EV16 (at equivalent ISO 64).

White Balance:

Automatic, manual (preset),outdoor (daylight/clouds), indoor Tungsten/Fluorescent).

Shutter:

CCD electronic shutter and programmed electronic shutter with independent aperture control (1 sec-1/2000 sec, 2 sec, 4 sec, 8 sec).

Focusing control:

Video feedback auto-focusing (single AF, continuous AF modes), and manual focusing.

Viewfinder:

True image zoom viewfinder.

Flash:

Built-in flash, recycling time about 6 seconds (on full battery charge, at room temperature, based on Kyocera testing standards). Flash range about 90 cm - 2 meters.

Recording Modes:

Flash modes (auto flash, red-eye reduction, forced flash, no flash, red-eye reduction forced flash*); macro recording mode, landscape recording mode; color modes (color, B/W, sepia); white balance (Auto, daylight, tungsten, cloudy, fluorescent, preset); AE modes (programmed, F2.8; F6.2); focus (AF/MF); long-exposure (OFF/2 sec/4 sec/8 sec); sensitivity (standard/2x/4x); metering modes (evaluation; center-weighted; spot). * Settable during long-exposure mode.

Playback modes:

Multiple image display; protect; erase (single image); all erase (erases all images in folder DCIM); image rotation (right/left 90 degrees); slide show; DPOF setting. *Note that files (and folders) recorded on other manufacturer's cameras and devices cannot be erased by this camera.

Setup modes:

Date; memory card format; electronic tone ON/OFF; auto power off setting function ON/OFF and time setting (time until camera power turns off automatically); AF mode selection (continuous or single-image); mode lock ON/OFF (preserves mode setting data); digital zoom ON/OFF; display language setting (Japanese/English); video output standard (NTSC/PAL); file number reset; default reset.

LCD monitor:

Built-in, 1.5" 110,000-pixel polysilicon TFT color LCD monitor; size: 521x218 pixels

         

         

Images which can be viewed at a larger size have a small magnifying glass icon in the bottom right corner of the image, clicking on the image will display a larger (normally 960 x 720 or smaller if cropped) image in a new window.

To navigate the review simply use the next / previous page buttons, to jump to a particular section either pick the section from the drop down or select it from the navigation bar at the top.

DPReview calibrate their monitors using Color Vision OptiCal at the (fairly well accepted) PC normal gamma 2.2, this means that on our monitors we can make out the difference between all of the (computer generated) grayscale blocks below. We recommend to make the most of this review you should be able to see the difference (at least) between X,Y and Z and ideally A,B and C.